Manual

243 PRO X User Manual
Table 22: List of error description messages
Error Message System(s) Problem Solution
hexadecimal number
<error code in
hexadecimal>
unknown error code
File and Automation Indication of a possible system error.
Note down the hexadecimal value of the error code and
contact MIDAS Technical Support, giving them this value.
a
artefact clone policy
violation
File and Automation
The cloning of this artefact (le type) is
not allowed.
Avoid using this type of operation.
artefact creation
policy violation
File and Automation
The creation of this le type is not
allowed.
Avoid using this type of operation.
artefact deletion
policy violation
File and Automation
The deleting of this le type is not
allowed.
Avoid using this type of operation.
artefact import
violation
File and Automation
The importing of this le type is not
allowed.
Avoid using this type of operation.
artefact load policy
violation
File and Automation
The loading of this le type is not
allowed.
Avoid using this type of operation.
artefact rename
policy violation
File and Automation
The renaming of this le type is not
allowed.
Avoid using this type of operation.
artefact replication
policy violation
File and Automation
The replication of this le type is not
allowed.
Avoid using this type of operation.
artefact save policy
violation
File and Automation
The saving of this le type is not
allowed.
Avoid using this type of operation.
attempt to overwrite
existing data
(overwrite not
enabled)
File and Automation
The operation to save or copy to the
existing le is not allowed, as les
cannot be overwritten.
Avoid using this type of operation.
b
bad device File and Automation
Operation could not be carried out
because the device, that is, the internal
compact ash of the PRO Series or USB
memory stick (if connected), does not
contain the required directory structure.
If the device is the internal compact ash of the PRO Series,
this could be an indication of a serious problem. Contact
MIDAS Technical Support.
If the device is the USB memory stick, check that the device
has not been disconnected from the control surface.
bad device ID File and Automation
The device identier has not been
recognised.
If you are exporting a le to a USB memory stick, check
that it has not been disconnected from the control surface.
bad directory File and Automation
The le system path does not terminate
in a directory.
This is highly unlikely to occur in practice, but is
an indication of a serious error. Contact MIDAS
Technical Support.
bad le File and Automation
The le system path does not terminate
in a le.
This is highly unlikely to occur in practice, but is
an indication of a serious error. Contact MIDAS
Technical Support.
bad le artefact File and Automation
The le has been detected as not
valid. Preferences, preset library and
show les are validated by comparing
their actual attributes against the
corresponding elds stored in the
header of the le, such as, le size,
checksum etc.
Try again. If still unsuccessful, and if the le is a show le,
try a backup le, if one is available.