Manual

240 PRO X User Manual
Swapping the active master controller
Although it is highly unlikely that the active master controller (MC) will develop a malfunction, should it ever happen you will need to activate the standby MC.
>> To swap the active master controller
1. At the GUI, choose home  Files.
2. Click FILE SYNC.
3. In the Master Controller File Synchronisation window, click the MAKE ACTIVE button of the standby MC (shown below). This will become the active one.
Synchronising the les
In exceptional circumstances the les may be out of synchronisation. For example, after a new MC has been tted and the system cannot determine which MC to use.
In this case you can choose which les you want synchronised.
>> To choose which le you want synchronised
1. At the GUI, choose home  Files.
2. Click FILE SYNC.
3. In the Master Controller File Synchronisation window, click the MAKE ACTIVE button of the MC containing the les you want to synchronise.
Elements of the Files screen and Master Controller File Synchronisation window used for swapping the active MC