Manual

226 PRO X User Manual
Technical Specications
Audio
Frequency response +1, -2 dB (20 Hz to 12 kHz)
Dynamic range 85 dB typical
Digital
Arithmetic processor 32-bit
Reverberation Hall, Plate, Chamber and Room, with
ve variations of each
Eects Alive, Non-Linear, Reverse, Delay,
ADT, Multitap Echo,
Sound-On-Sound and Innite Room
Parameters
Pre-delay 0 to 990ms
Pattern (density) Adjustable 0 to 9 increments (Grainy
to Dense)
Level (depth) Adjustable 0 to 9 increments (Distant
to Close)
Decay time 0.1 to 18 seconds
Room size 8 to 90 metres linear dimension
LF decay Adjustable ± 7 increments ref.
1kHz decay time
HF decay Adjustable ± 7 increments ref.
1 kHz decay time
Since the above reverberation parameters are optimised to ensure
authentic acoustical simulation, they are by necessity program-dependent.
Controls
Input mute Removes audio feed from
reverberation section.
Reverb mute Clears unwanted reverberant signal.
Input level control From 6 dB gain to innite
attenuation.
Headroom indicator 10-point LED display, 0 dB to -27 dB.
Display Simultaneous display of all
parameter information.
Parameter selection and
store functions are veried by
individual LEDs.