Manual

190 PRO X User Manual
Outputs on the GUI
On the GUI, the output fast zone (mix bay only) merely provides feedback, such as signal level, solo on/o status etc., whereas the output ‘overview’ displays (for each
output) in the channel strips provide limited control. Detailed control is provided by the processing areas.
Only the Overview GUI screen (default) contains output fast strips (see “GUI” in chapter 3).
Output fast zone (Overview screen)
The lower-right corner of the Overview screen has three rows of output fast strips. Each row displays a bank of eight outputs, of which there are two types
(aux and matrix).
On the GUI, output bank selection is via a column of buttons to the right of both banks, which replicate the ones on the control surface’s mix bay (to right of ouputs).
For details of the contents of each output fast strip, see “Mute, safes, level and solo”.
GUI channel strips
Similarly to the inputs, when an output channel is selected, its ‘overview’ appears in the GUI channel strip, as illustrated in the gures on the following pages.
These overview displays provide limited controls and status information, and give access to processing areas.
The following processing areas are available from ‘overview’ displays in the GUI channel strip.
Channel controls Aux Return Matrix Master
Insert only N/A Yes N/A N/A
Conguration only N/A Yes N/A N/A
Insert and conguration Yes N/A Yes Yes
Compressor Yes N/A Yes Yes
EQ Yes Yes Yes Yes
Buses Yes (matrix only) Yes (matrix only) N/A Yes (matrix only)
Solo, mute, safes and fader only N/A N/A Yes N/A
Masters and solo, mute, safes and fader Yes Yes N/A Yes