Manual

Table Of Contents
188 PRO X User Manual
Chapter 31: Outputs
This chapter shows you the areas on the control surface that are used to manage
the outputs and also describes their function. There are four type of output:
auxes, returns, matrices and masters.
The structure of this chapter is loosely based on the signal path of the output
channels and also the processing areas, which are opened via the output channel
overview displays in the GUI channel strip.
Output channel areas on the control surface
The mix and master bays house the areas on the control surface pertaining to
the outputs (see diagram below).
The mix bay houses the output fast zone, which contains two banks of output
fast strips. This bay also contains a channel strip, mix (sends) section and
navigation area, which are replicated on the master bay.
The GUI has a similar conguration to the control surface, whereby the GUI screen
in the mix bay has an output fast zone, and both GUI screens have a channel strip.
In general, operation of the outputs is via the mix bay, although this is
conguration dependent.
Areas on the control surface concerned with the output channels
Pan and fader ‘ip’
Channel strip
and mixes
(master bay)
Channel strip
and mixes
(mix bay)
GUI control areas
Output fast
zone