Manual

186 PRO X User Manual
LCD select button
The LCD select buttons in the input fast strips are used for input channel navigation and group selection. They also provide useful feedback for the user.
For more information on navigation, see “Navigating the input channels” in Chapter 8.
Mute, solo and safes
This section contains the MUTE and SOLO buttons, and three safe LEDs (mute safe, auto safe and fader safe).
Mute, solo and safes for the inpu t channels on the control surface and GUI
Item Control Function
1 MUTE button
Mutes all post-processing signals exiting the channel. In addition to scene recall, it can also be remotely muted from the
auto-mute masters.
2 SOLO button
Activates signal routing to the monitor A section of the control centre by sending the input channel signal to PFL mono and AFL
stereo buses. The solo system is auto-cancelling, so that each new solo cancels the last one. Input solos override any active VCA solos.
This button is a latching type. Give a short press to latch it and a long press to self-connect when it is released.
3 B button
This solo button (GUI only) changes the operation of the SOLO switch so that it routes signals to the monitor B section of the
control centre.
1
3
2
1
2