Manual

183 PRO X User Manual
EQ graph
This section illustrates the use of the EQ gain, freq and width control knobs.
Gain
Adjusting the gain (gain control knob) changes the height of the envelope.
The envelope ‘ips’ about the origin, which is at 0dB.
Frequency
Adjusting the frequency (freq control knob) changes the horizontal position of
the envelope.
Width
Adjusting the bandwidth (width control knob) changes the width of
the envelope.
What the graph colours represent
Any combination of EQ envelopes for the four bands can be displayed, and each
one is represented by a dierent colour.
Mixes
Each input channel can send a variable contribution to each of the 16 aux
buses (aux sends) and up to up to 24 matrix buses (mtx sends). The buses
are controlled in pairs via mix controls that give continuous adjustment (in the
range +6dB to o) of sub group levels sent to matrix mixes. The controls in
the mix section (mix and master bays) include level/pan and level control
knobs for each bus pair, whose function depends on the current bus mode in
operation. When a bus pair is stereo linked, the AFL button (input fast strip only)
is activated; although it is only enabled when you switch it on.
Red = bass
Yellow = lo mid
Green = hi mid
Blue = treble
Aux and matrix mix buses for the input channels on the control surface and GUI
1
2
3
4
2
3