Manual

180 PRO X User Manual
Insert
Input channel insert section provides a send and return out of the signal path, primarily so that an eects device can be added to the signal’s processing. The send
destination and return source may only be set from the GUI screen, although the INS switch can be found on both the GUI and also in each input fast strip. This section
is optional and assigned on a channel-by-channel basis.
Insert controls for the input channels on the control surface and GUI
Item Control Function
1 INS switch
Connects (inserts) returned programme material to the channel signal path, provided both the
insert send and insert return points haves been assigned.
2 insert return eld Shows you the source of the insert return.
3 insert send eld Has a drop-down list, which shows the destination(s) of the insert send.
4 assign LED Green LED that illuminates to show that an insert return point is patched.
5 dest button Opens the Patching screen from where you can select the destination of the insert send.
6 source button Opens the Patching screen from where you can select the source of the insert return.
4
5
6
1
3
2
1