Manual

163 PRO X User Manual
Chapter 30: Inputs
By default, all of the input channels are mono, although any two adjacent channels can be linked to form a stereo pair. The order of processing in the signal path of
both channel types is basically the same.
The order of the descriptive sections in this chapter loosely follow the physical layout of the input fast strips (top to bottom), which is also approximately the signal
path taken by the input channels. However, this varies according to signal processing order and the operation of certain controls.
Although the input fast strips in the 12- and 4-channel inputs bays are identical in appearance, their function may vary, depending on the operating mode. Therefore,
this chapter will concentrate on the fast strips in the 12-channel input bay and its associated channel strip in the mix bay, although any dierences between the two
input bays will be highlighted and explained.
Input channel routing
The diagram below shows the default signal path, on which the structure of this chapter is based. This chapter will explain each of these groups of controls, showing
the pertinent controls on both the control surface and GUI.