Manual

161 PRO X User Manual
Item Description
1 word clock 75R section (see “Word clock”).
2 AES3 sync section (see “AES3 sync”).
3 Ethernet tunnel section (see “Ethernet tunnel section”).
4 Ethernet control section (see “Ethernet control section”).
5 AES50 audio section (see “AES50 audio”).
6
snake X and snake Y sections (see “snake X and
snake Y sections”).
Word clock
The word clock 75R section comprises input and output BNC cable sockets for
synchronisation with external devices that can transmit/receive a 96kHz word
clock signal.
AES3 sync
input and output connectors for synchronisation with external devices that can
transmit/receive a 96kHz AES3 signal.
Ethernet tunnel section
An external 10Mb/s port (on EtherCon®) allows connection to external non-
MIDAS equipment, such as hubs and switches.
Note: We recommend that you connect this port after the PRO X Control Centre has
powered up, see “Powering the system” in chapter 4.
BNC type
connector
BNC type
connector
Ethernet control section
Two 100Mb/s Ethernet control ports (on EtherCon®) let you connect equipment, such as the KLARK TEKNIK DN9331 RapidE.
AES50 audio
Three AES50, 24-wide, bi-directional digital audio EtherCon® ports.
DN9331 RapidE
x3