Manual

120 PRO X User Manual
>> To switch between the overview and zoom displays
Do one of the following:
• To open the overview display from one of the zoom displays, press any of the
LCD buttons in the I zone.
• To open a zoom display from the overview display, press the desired LCD
button in the I zone.
>> To navigate the zoom displays
If you are at a zoom display and you want to go to another one (for example,
to adjust a fader or front panel control) use the left and right arrow buttons
in the assignable controls panel (see “Rack and unit control navigation”
in Chapter 30). For diagrams of the available zoom displays, see Figure 24 “I zone
LCD button assignments in the overview display”.
>> To adjust a group of faders simultaneously in the
overview display
Make sure the overview display is shown on the GUI and adjust the appropriate
control knob in the I zone. The group of faders will adjust in equal amounts from
their relative positions. However, continual adjustment will eventually take all of
the group’s faders to the maximum/minimum extent.
>> To adjust a single fader in a zoom display
If necessary, navigate the desired zoom display (containing the fader you want to
change) to the GEQ window. In the I zone, adjust the desired control knob.
Note: You can also adjust a single fader in the overview display using drag, or in the
rack view (with the GEQ window closed).
>> To operate a button or control knob of a GEQ
For details, see “To operate a button of an eect” and “To operate a control knob
of an eect” in Chapter 30.