Manual

118 PRO X User Manual
Controlling a GEQ via the I zone
You can use the I zone to adjust the faders and controls, such as the high/
low pass lters, notch lters, slope etc., of an internal GEQ. For information
on opening the Graphic EQs screen and selecting a GEQ, see Chapter 15,
“Graphic Equaliser (GEQ)”.
Similarly to the internal eects, there is an assignable controls panel
on the GUI (see “About the Assignable Controls window”). However,
to accommodate the faders there are, eectively, two levels of display, known as
“overview” and “zoom”.
The overview display appears initially when you open the window of the GEQ,
and lets you adjust a group of GEQ faders simultaneously. Each LCD button in
the I zone is assigned to a group of faders. For identication, the groups are
numbered, as shown in the following diagram.
Fader group
ID numbers
(encircled)
zone
Figure 23: Fader group control knob assignments in the overview display