Manual

117 PRO X User Manual
>> To assign an internal eect/GEQ to the I zone
1. At the output bay GUI screen, do one of the following:
• To control one of the internal eects (for example, a phaser) using the
I zone, open the Eects screen.
• To control one of the GEQs using the I zone, open the
Graphic EQs screen.
2. Select the desired rack unit by doing one of the following:
• In the I zone, use the up and down arrow buttons of the Shift function
to navigate to the desired rack unit. Select the unit by pressing
SHIFT + open.
• At the output bay GUI, click the desired rack unit.
The window of the rack unit will open, containing the assignable controls
panel at the bottom. A page/group of parameters will be automatically
assigned to the assignable controls panel and the I zone.
You can now control the rack unit using the I zone.
>> To change the I zone control assignments
Click the left/right arrow button.
In view 2/4 of the 3-band compressor eect the I zone is assigned to the Mid section. Clicking the right arrow takes you to view ¾, and the I zone is now assigned to the
Hi section. If you clicked the left arrow instead, this would take you in the opposite direction to view ¼, and the I zone would be assigned to the Lo section.
>> To change to another device in the rack
Click the up/down arrow button. This will open the next device (eect/GEQ)
in the device window. If there is no device assigned to the newly opened rack
position, the device window will be empty.
Controlling an internal eect via the I zone
When controlling an eect, the GUI shows the current button and control knob
I zone assignments.
>> To operate a button of an eect
1. Make sure that the eect’s button you want to operate is assigned to the
I zone. If necessary, navigate the eects page containing the desired button
to the I zone. (The text at the top of the LCD button indicates its assignment.)
2. Press the desired I zone button.
>> To operate a control knob of an eect
1. Make sure that the eect’s control knob you want to operate is assigned to
the I zone. If necessary, navigate the eects page containing the desired
button to the I zone.
2. Adjust the desired control knob.