Quick Start Guide

42 43Quick Start Guide500 SERIES PARAMETRIC EQUALISER 512
Specications
Controls
Treble
Dual freq/gain knobs, shelf/bell switch,
width knob (bell mode)
Hi mid Dual freq/gain knobs, width knob
Lo Mid Dual freq/gain knobs, width knob
Bass
Dual freq/gain knobs, shelf/bell switch,
width knob (bell mode)
EQ in In/out switch
Input and Output
Input Mono, balanced line
Output Mono, electronically balanced
System
Noise at unity gain -97 dBu (22 Hz - 22 kHz)
CMRR, unity gain, 1 kHz -70 dB (typical)
Input impedance, 1 kHz 20 kΩ
Frequency response, unity gain (EQ set at) 20 Hz - 20 kHz, +/- 1 dB
Distortion, unity gain, 1 kHz
0 dBu <0.005%
+10 dBu <0.005%
+20 dBu <0.01%
Maximum input level, 1 kHz +21 dBu
Maximum output level, 1kHz +21 dBu
Output impedance, 1 kHz 50 Ω
EQ
Treble (shelf mode)
1 kHz to 20 kHz, +/- 15 dB cut/boost, slope =
4 dB per octave
Treble (bell mode)
1 kHz to 20 kHz, +/- 15 dB cut/boost,
bandwidth 0.1 - 2 octaves
Hi mid (bell only)
400 Hz to 8 kHz, +/- 15 dB cut/boost,
bandwidth 0.1 - 2 octaves
Lo mid (bell only)
100 Hz to 2 kHz, +/- 15 dB cut/boost,
bandwidth 0.1 - 2 octaves
Bass (bell mode)
20 Hz to 400 Hz, +/- 15 dB cut/boost,
bandwidth 0.1 - 2 octaves
Bass (shelf mode)
20 Hz to 400 Hz, +/- 15 dB cut/boost,
slope = 4 dB per octave
Power Requirements
Voltage +16 V and -16 V
Power consumption 100 mA, 3.2 W
Physical
Dimensions (H x W x D) 132 x 38 x 184 mm (5.2 x 1.5 x 7.2")
Weight 0.7 kg (1.5 lbs)