Quick Start Guide

14 PRO SERIES NEUTRON Quick Start Guide 15
DSP modules
Four module slots in the rear panel each accept a
NEUTRON module.
(1) DSP audio sections have the same
functionality as the DSP audio rings panel on
front of the unit.
a. Link ok LED (green) illuminates to show
that the link is active (link is good).
b. Link error LED (red) illuminates to show
that the link has failed.
(2) The DSP control section has the same
functionality as the DSP control panel on the
front of the unit.
(3) The diagnostics 9-way D-type connector
socket (female) is for use by service
personnelonly.
a
b
(1) (2) (3)
copper
DL351
1
MIDAS PRO X
copper
optical
optical
(1)
(2)
(5)
(6)
(4)(3)
(1)
(4)
(3)
(2)
2
3
4
5
6
7
8
tunnel
Connector Panel Router Panel
(1) Console (for example, a MIDAS PRO X).
(2) NEUTRON connector panel.
(3) Neutrik etherCON connections for connecting the X and Y copper snakes to
the console.
(4) Neutrik opticalCON connections for connecting the X and Y optical
(bre optic) snakes to the console.
(5) AES synchronisation input and output connections.
(6) Word clock 75 R input and output BNC connections for synchronisation
with routers.
(1) NEUTRON router panel.
(2) Neutrik etherCON connections for connecting AES50 audio connectors 1 to
4 to the NEUTRON DSP Engine.
(3) Connection to Neutrik etherCON connectors 5 to 8 is optional.
(4) For connecting ’tunnelling’ Ethernet.