Quick Start Guide

18 19Quick Start GuideMR12
Step 3: Network
Connection
Getting Started
First Wi remote connection to your
MR12 mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
M-AIR Android from the Google
Play* store
• iPad: M-AIR for iPad from the
App Store
• PC: M-AIR EDIT for
Windows*, Mac or Linux from
midasconsoles.com
2. Set the REMOTE switch on your
mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your mixer’s network
settings to default values by
holding the RESET button for 2
seconds. This is located in the
small hole above the Wi icon and
requires a paper clip or similar tool
to reach.
4. Switch your remote control device
on and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless
& Networks dialog on your
Android system.
2. Switch “Wi ” on.
3. Click on ‘Wi ’ to select a network.
From the list of networks,
select your M-AIR mixer’s name,
e.g. “MR12-19-1B-07”. After a few
seconds, the status should change
to ‘Connected’.
4. Open your M-AIR for Android
app and it will show similar
information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wi Lock = None
• Wi connected to
MR12-19-1B-07
5. You may choose to lock the
connection to this speci c Wi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling your mixer.
6. Click on “Connect” and tap on
the mixer’s name in order to
connect the app with your mixer.
Note - if a warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (seethe MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
7. Once the app is connected to
your mixer, allparameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your mixer remotely!
iPad:
1. Start the Settings/Wi dialog on
your iOS.
2. Switch “Wi ” on.
3. Select your mixer’s name
from the list of networks, e.g.
“MR12-19-1B-07”. After a couple of
seconds, the status should change
to “Connected”, indicated by a
checkmark.
4. Open your M-AIR for iPad app
and it will show any mixers
(“Devices”) found in that network,
with their IP address, which in this
case is 192.168.1.1.
5. Tap on the mixer’s icon to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (see the MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your mixer remotely!
PC: M-AIR EDIT for Windows,
Mac or Linux
1. Open the Wireless Network
Connections dialog on your
operating system.
2. Make sure the “WLAN” or “Wi ”
adapter is switched on.
3. View the list of wireless networks
and select your mixer’s name,
e.g. “MR12-19-1B-07”. After a
couple of seconds, the status
should change to “Connected”,
indicated by a check mark.
4. Open your M-AIR Editor for Win/
Mac/Linux and click on “Setup”.
The list will show any mixers found
in that network, withtheir name
and IP address, which in this case
is 192.168.1.1.
5. Click on your mixer’s name,
e.g. “MR18-19-1B-07”, and con rm
to synchronize from mixer to PC in
order to connect the app with your
mixer. Ifa warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (see the MR12 pages on
midasconsoles.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be transferred automatically.
Enjoy exploring all mixing
functions of your mixer remotely!
* App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Windows is either a
registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
DIGITAL iPAD/TABLET MIXER MR12 Network Connection