Quick Start Guide M32 LIVE Digital Console for Live and Studio with 40 Input Channels, 32 MIDAS PRO Microphone Preamplifiers and 25 Mix Buses and Live Multitrack Recording
M32 LIVE Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 M32 LIVE Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 M32 LIVE Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 M32 LIVE 其他的重要信息 Quick Start Guide 11. 请只使用厂家指定的附属设备和 法律声明 配 件。 对于任何因在此说明书提到的全部或部份 描述、 图片或声明而造成的损失, MUSIC Tribe 不负任何责任。 技术参数和外观若有更 改, 恕不另行通知。 所有的商标均为其 各自所有者的财产。 MIDAS, KLARK TEKNIK, 12.
10 M32 LIVE Quick Start Guide 1. Control Surface (11) (3) (4) (5) (6) (7) (8) (9) (1) (2) (12) (6) (10) (13) (11) ASSIGN - Assign the four rotary controls to various parameters for instant access to commonly-used functions. The LCD displays provide quick reference to the assignments of the active layer of custom controls. Assign each of the eight custom ASSIGN buttons (numbered 5-12) to various parameters for instant access to commonly-used functions.
12 M32 LIVE Quick Start Guide 3. Main Display The SETUP screen contains the following separate tabs: (1) • global: This screen offers adjustments for various global preferences of how the console operates. (2) config: This screen offers adjustments for sample rates and synchronisation, as well as configuring high-level settings for signal path buses.
14 M32 LIVE Quick Start Guide 4. Quick Reference Section Editing Channel Strip LCDs 1. Hold down the select button for the channel you wish to change and press UTILITY. 2. Use the rotary controls below the screen to adjust parameters. For a stereo Matrix, select a Matrix and press the VIEW button on the CONFIG/PREAMP section of the channel strip. Press the first rotary control near the screen to link, forming a stereo pair.
A/D AUX RETURN (1-6) SLOT (32ch OUT) AES-50 B (48ch OUT) AES-50 A (48ch OUT) SLOT (32ch IN) AES-50 B (48ch IN) AES-50 A (48ch IN) A/D PHANTOM MONITOR L+C/R+C OUT MONITOR SOURCE IN MONITOR LR OUT MAIN LRC PRE EQ OUT MAIN LRC OUT MATRIX 1-6 OUT MIX 1-16 OUT PATCH CUE MAIN LRC INSERT SEND MAIN LRC INSERT RETURN MATRIX 1-6 INSERT SEND MATRIX 1-6 INSERT RETURN MIX 1-16 INSERT SEND MIX 1-16 INSERT RETURN FX 1-8 IN (L / R) INPUT (1-32) +48V USB PLAY USB REC FX 1-8 OUT (L / R) Revision
18 M32 LIVE Quick Start Guide Input/Output Characteristics Frequency Response @ 48 kHz Sample Rate Dynamic Range, Analogue In to Analogue Out A/D Dynamic Range, Preamplifier and Converter (Typical) D/A Dynamic Range, Converter and Output (Typical) Crosstalk Rejection @ 1 kHz, Adjacent Channels Output level, XLR Connectors (Nominal / Maximum) Output Impedance, XLR Connectors (Unbalanced / Balanced) Input impedance, TRS Connectors (Unbalanced / Balanced) Non-Clip Maximum Input Level, TRS Connectors Output
