Quick Start Guide

Module Connector Pin-Outs
Pin Number Description
1 Chassis GND
2 Output + (hot)
3 Aux output + (hot)
4 Output ‐ (cold)
5 Audio GND
6 Compressor stereo link
7 Aux output ‐ (cold)
8 Input ‐ (cold)
9 Aux input ‐ (cold)
10 Input + (hot)
11 Aux input + (hot)
12 PSU +16 V
13 PSU GND (0 V)
14 PSU ‐16 V
15 PSU +48 V phantom power
Note: All XLR connections are wired pin 1 = audio GND, pin 2 = + (hot), pin 3 – (cold)
Specications
Controls
Power Front panel switch and lamp
Comp Bus Rear panel switches, 1-2, 2-3, 3-4, 4-5, 5-6
Audio link Rear panel switches, 1-2, 2-3, 3-4, 4-5, 5-6
Ground lift Rear panel switch
Input and Output
Input 6 x balanced XLR
Aux input 6 x balanced XLR
Output 6 x balanced XLR
Aux output 6 x balanced XLR
Power Requirements
AC Input Voltage 100-240 VAC, 50-60 Hz, IEC input
Output Voltages 3.2 A @ ±16 V, 300 mA @ +48 V (phantom power)
Power consumption Typically 35 W
Physical
Dimensions (HxWxD) with handle and feet 140 x 349 x 211 mm (5.5 x 13.7 x 8.3")
Dimensions (HxWxD) with rack ears, no feet 132 x 483 x 211 mm (5.2 x 19 x 8.3")
Weight 4.4 kg (9.7 lbs)
LEGEND L6
Controls
Power Front panel switch and lamp
Comp Bus
Rear panel switches,
1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10
Audio link
Rear panel switches,
1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10
Ground lift Rear panel switch
Input and Output
Input 10 x balanced XLR
Aux input 10 x balanced XLR
Output 10 x balanced XLR
Aux output 10 x balanced XLR
Power Requirements
AC Input Voltage 100-240 VAC, 50-60 Hz, IEC input
Output Voltages 3.2 A @ ±16 V, 300 mA @ +48 V (phantom power)
Power consumption Typically 55 W
Physical
Dimensions (HxWxD) 140 x 483 x 211 mm (5.5 x 19 x 8.3")
Dimensions (HxWxD) without feet 132 x 483 x 211 mm (5.2 x 19 x 8.3")
Weight 4.9 kg (10.8 lbs)
LEGEND L10
44 45Quick Start GuideLEGEND L10/L6