Operation Manual

11
DL351 Modular I/O
Operator Manual
Chapter 5: Main Menu
This chapter describes the menu options that allow you to set up your
DL351 Modular I/O.
About the main menu
The main menu is accessed via the control panel and provides five options that allow
you to carry out the following:
• Select the method of AES50 synchronisation; see “Option 1 — AES clock” on
page 17.
• Set up the network unit ID of the DL351 Modular I/O; see “Option 2 — Set ID” on
page 17.
• Check the CBMA version number of the DL351 Modular I/O; see “Option 3 — CBMA
version” on page 18.
• Check the software version of the DL351 Modular I/O; see “Option 4 — Software
version” on page 18.
• Set up the digital I/O board(s) of the DL351 Modular I/O, if fitted; see “Option 5 —
Digital boards” on page 19.
Main menu flowchart
The following pages show the main menu and submenu options.