User Manual

ASSEMBLY INSTRUCTIONS
Please confirm whether the parts are complete before installation.
Parts list
NO. Name Quantity
1 Midas-926 Gateway Light Device 1
2 Antenna 1
3 5V DC-DC adapter
1
4 Pin 1
Plug in the provided 5V DC-DC power adapter into an outlet and screw
in the provided antenna on the back of the Midas-926 Gateway Light.
Connect the device using Ethernet cable with your router and make
sure the internet access is avaible.
Wait for the device starting and the LoRaWan function is fully
operational when the LoRa indicator light is steady green.
Note: there is no need to set up the device. All the functions will be
automatically started after power on.
DEBUGGING
The debugging of Midas-926 Gateway Light should pay attention to the
following aspects:
1.When powering on, the system LED should blink meaning the system
is booting. During operation, this system LED should blink from time to
time but less frequently. If system LED doesn’t light up at all, the OS
may be not working.
2.During operation, the LoRa LED should be on, or there must be some
software failure in the device.