Installation & Assembly

Product Solution That Builds Your Business

Toll Free: 1.888.250.3113 www.midaseventsupply.com

The Charger Plate Crate

Note: Side B has multiple vertical

guides

Side A Base Side B

1 2 3

Slide base down channel of side B. Ensure flat side of base Repeat step 1

faces the inside of the crate. Ensure to use a non marking With 2

side B

rubber mallet on the base panel ONLY. Put the crate on the

table to form an upside

down “U” and insert

side A with handle side

in first. Repeat for

other side A .

PAGE 1
The Charger Plate Crate Note: Side B has multiple vertical guides In Side A Base Side B 1 2 Slide base down channel of side B. Ensure flat side of base faces the inside of the crate. Ensure to use a non marking rubber mallet on the base panel ONLY. 3 Repeat step 1 With 2nd side B Put the crate on the table to form an upside down “U” and insert side A with handle side in first. Repeat for other side A . Product Solution That Builds Your Business Toll Free: 1.888.250.3113 www.midaseventsupply.
PAGE 2
The Charger Plate Crate 4 5 Use mallet to insert “L” bracket locks into each corner slot on top of crate. 7 6 Ensure the rounded edges of The “L” bracket are facing down. 8 Repeat step 6 for the other side of crate. There are 6 slots on Side B. Use mallet to insert locking pegs into each slot. Ensure the rounded side faces inwards. Your Charger Plate Crate is Assembled! Product Solution That Builds Your Business Toll Free: 1.888.250.3113 www.midaseventsupply.