User Guide

Midas XL4 Automation system
Page 18
Memory menu
Memory – Mem Tog
Internal
External
Copy All
Clear All
Mem Tog (Memory Toggle)
This allows you to swap from the memory you are currently working on to other. For example if you are
working on Internal memory mode choosing YES to Mem Tog will switch over to External memory.
Internal
This setting sets the system operation to operate with the central control unit’s internal memory.
External
This setting sets the system operation to operate with the RAM card memory .
Copy all
This function copies the data to and from the RAM card.
If INTERNAL memory is active, the data will be copied from internal memory to the RAM card.
If EXTERNAL memory is active, the data will be copied from the RAM card to the internal
memory.
Clear all
This function clears the data in the memory or RAM card.
If INTERNAL memory is active, the data will be cleared from internal memory .
If EXTERNAL memory is active, the data will be cleared from the RAM card.
WARNING!
Use this function with care! Although future software releases may feature an UNDO function, the
current software does not. Once erased there is no way to retrieve the data unless you have saved it to a
RAM card which has been kept somewhere safe.