User Guide

Midas XL4 Automation system
Page 17
MIDI IN
This function allows you to edit the midi program change that the scene will be recalled by when
received. The XL4 will monitor the midi channel set in the CH.MIDI in located in the SYSTEM Menu.
MIDI CLR
This function allows you to clear all the mikdi information associated with the particular scene you are
on.
This function is used to set up a MIDI message which will be transmitted whenever the scene
containing the message is recalled.
MIDI OUT
This function allows you to edit the 8 possible midi out messages the console can send out when a scene
is recalled.
To program the multiple-midi outputs the following procedure must be followed.
1/ Press
STORE
and scroll the screen using the jogwheel until EDIT is seen, press the YES button.
2/ Scroll the screen until MIDIOUT is seen, press the
YES
button.
3/ You may now select one of the eight midiout messages for editing. This may be done using the
jogwheel. When the required message number is displayed in the left hand window press the YES button.
4/ In the left hand window the midi channel the message is sent out on will be displayed. This may be
changed using the jogwheel, when the required channel is selected press YES.
5/ Using the jogwheel you may choose one of the following to edit in the right hand display NOTEOFF,
NOTEON, PROGRAM and CLEAR when the required perameter is displayed press YES. CLEAR will
delete that particular message from the group sent with that scene change.
6/ The chosen perameter may then be changed using the jogwheel and selected by pressing YES when the
required value is displayed.
7/ When all the midi out messages have been edited to exit scroll through the message list until 9 EXIT is
displayed and press YES.
NB: This Function edits the Midi information for the last scene recalled using the Now, Next or Last
button.