User Guide

MIDAS
XL441
0
0
00
masters right
masters left
TALK TALK
INS
INS
mute mute
solo solo
matrix
+6
+6
+6
+6
o o
o o
o o
o o
10
10
5
5
0
20
30
40
50
60
dB
The MASTER LEFT controls
give continuous adjustment of
master left signals that are
sent to the matrix mixes. The
adjustment is from + 6dB to
off.
The MASTER RIGHT controls
give continuous adjustment of
master right signals that are sent
to the matrix mixes. The
adjustment is from + 6dB to off.
The TALK switches connect
the matrix busses to the
COMMS module. When the
TALK TO MATRIX switch
on the COMMS module is
activated it is then able to
route its oscillator, pink noise,
external input, talk mic or
comms mic to the matrix mix.
The INS switches connect the
matrix insert return signals to
the matrix mixes.
The matrix MUTE switches
mute the matrix outputs but not
the insert sends. These switches
are under automation control.
The MATRIX FADERS give
continuous adjustment of the
matrix levels from + 10dB to
off.
The matrix SOLO switches
send signals to the PFL mono
and AFL stereo busses. If the
switch is pressed for a short
time it will latch on or off, but
if it is held on for more than 1
second the latching is disabled
and when the switch is
released the solo will turn off.
These solo switches can not be
operated if the console is
being used in SOLO IN
PLACE mode. This is a safety
feature which prevents matrix
output signals from being
routed back to their inputs via
the master matrix feed.
40