User Guide

MIDAS
XL441
0
+10
MUTE
SOLO
MTX
stereo
aux
master
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
0
0
+6 +6
mix 16
mix 15
mix 14
mix 13
mix 12
mix 11
mix 10
mix 9
mix 8
mix 7
mix 6
mix 5
mix 4
mix 3
mix 2
mix 1
global pre
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
o o
ON
The STEREO AUX MASTER
control gives continuous
adjustment of the stereo aux
output level from + 10dB to off.
The stereo aux MUTE switch
mutes the stereo aux outputs.
The stereo aux SOLO switch
sends stereo aux signals to the
PFL mono and AFL stereo
busses. If the switch is
pressed for a short time it will
latch on or off, but if it is held
on for more than 1 second the
latching is disabled and when
the switch is released the solo
will turn off.
The MTX switch sends the pre
fader stereo aux bus signals to
the matrix mix directly below
so that the console can be used
for monitor applications.
The MIX controls ( 1 to 16 )
give continuous adjustment of
the audio sub group levels
sent to the matrix mixes from
+ 6dB to off. If the FADER
CHANGE OVER switch on
the GROUP module is active
the mono aux bus will route
to the matrix mix in place of
the audio sub group.
The GLOBAL PRE ON switch
changes the audio sub group
signals that are routed via the
mix controls to the matrix from
post fader to pre fader.
39