User Guide

35
C/O
SOLO
PFL
monitor
metering
global
add mode
1
2
3
4
5
6
7
8
a
u
t
o
m
u
t
e
r
g
o
u
p
m
a
s
t
e
r
s
The AUTO MUTE GROUP
MASTER switches(1to8)
activate the mute circuits on any
appropriately mute group
assigned input channel or audio
group.
The SOLO ADD MODE
switch allows multiple
channel access to the solo
busses. When the solo add
mode is off the action of
pressing a solo switch will
cancel any other active solo
except for the master solo
switches where the canceling
effect is only temporary ( see
XL421 Master Module on
page 28 ).
The GLOBAL METER
CHANGE OVER switch
changes the operation of every
meter on the console except the
comms meters and the record
meters. The "normal" meter
operation is to monitor pre fader
on input channels and post fader
on all other signals. When the
global meter change over is
active the meters change to
monitor input amplifiers or bus
amplifiers ( as appropriate ) on
all signals.
The PFL MONITOR switch
sends the mono PFL solo bus
signal to the headphones and
local outputs in place of the
stereo AFL solo bus signals.