User Guide

dB
SOLO
VCA
INS
mute
+21
+18
+15
+12
+9
+6
+3
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
-36
aux i/p mutes
mono
output
10
10
5
5
0
20
30
40
50
60
dB
The mono INS switch
connects the mono insert
return signal to the mono mix.
The VCA switch connects the
mono vca fader to the stereo
master fader so that the mono
output tracks any changes of
the stereo master fader.
The mono SOLO switch
sends the mono master signal
to the PFL and AFL solo
busses. If the switch is
pressed for a short time it will
latch on or off, but if it is held
on for more than 1 second the
latching is disabled and when
the switch is released the solo
will turn off. The master mix
signal can not be sent to the
solo busses while any other
solo is active.
The mono METER monitors
the peak level of the post
fader mono signal. When the
GLOBAL METER CHANGE
OVER switch on the
COMMS module is activated
the meter monitors the mono
bus summing amplifier
output.
The mono MUTE switch mutes
the mono output but not the
mono insert send. This switch is
under automation control.
The mono FADER gives
continuous adjustment of the
mono output level from + 10dB
to off.
The AUX I/P MUTE mutes
every aux line return input on
the GROUP modules.
27