User Guide

MIDAS
XL414
l
l
c
c
r
r
pan pan
TALK TALK
INS INS
ST ST
mute mute
solo solo
group
10
10
5
5
0
20
30
40
50
60
dB
The TALK switches connect the
audio sub groups to the
COMMS module. When the
TALK TO GROUPS switch on
the COMMS module is
activated it is then able to route
its oscillator, pink noise,
external input, talk mic or
comms mic to the audio sub
groups.
The INS switches connect the
group insert return signals to
the audio sub groups.
The ST switches connect the
post fader audio sub group
signals to the stereo master
bus via the pan controls.
The group PAN controls place
the audio groups within the
stereo master mix and have a
constant power law i.e. -3dB at
the centre position.
The group MUTE switches
mute the audio groups at all
points except the insert send
and are under automation and
automute group control.
The group SOLO switches send
the group input signals to the
mono PFL and stereo AFL
busses. If a switch is pressed for
a short time it will latch on or
off, but if it is held on for more
than 1 second the latching is
disabled and when the switch is
released the solo will turn off.
The GROUP FADERS give
continuous adjustment of the
audio sub group levels from +
18