User Guide

MIDAS
XL404
pan pan
ll
rr
cc
mute
pre
pre
pre
pre
st aux 1&2
st aux 3&4
st aux 5&6
st aux 7&8st aux 7&8
0
+6
0
+6
0
+6
0
+6
ON
ON
ON
ON
INS
ST
The ST AUX controls (1 to 8)
give continuous adjustment of
the level sent from the input
channel (post pan) to the stereo
aux busses. The level
adjustment is from + 6dB to
off.
The stereo aux ON switches
connect signals from the input
channel to the stereo aux
busses and are under
automation control.
The stereo aux PRE switches
change the signal sent to the
stereo aux busses from post
fader to pre fader whilst
retaining the post pan stereo
image.
The left and right PAN
controls are used to place the
input channel signals within a
stereo mix. As well as image
placement, the controls can
also adjust the image width
from stereo through mono to
reverse stereo (left and right
crossed over). The controls
have a constant power law i.e.
-3dB at the centre position.
The INS switch connects the
left and right input insert
return signals to the input
channel and is under
automation control.
The ST switch connects the
input channel post fader
signals to the stereo master
buss via the pan controls and is
under automation control.
The MUTE switch mutes the
input channel at all points
except the insert send and pre
insert/eq direct output. This
switch is under automation and
auto mute group control.
12