User Guide

MIDAS
XL405
+70
+25
+35
+15
mic
30 100
10
400
r
l
C
hi-pass
balance
left
right
+18+
+15+
+12+
+9+
+6+
+3+
0
-3-
-6-
-9-
-25-
/
O
/
O
48V
-25
The MIC control gives
continuous adjustment of left
and right mic amp gains from
+15dB to +70dB.
The PAD switch gives 25dB of
attenuation to the mic signals
and will allow the connection
of high output microphones or
line signals. If the mic amps
are transformer coupled
(option) the pad greatly
reduces the risk of saturation at
very low frequencies.
The 48V switch connects 48
volt phantom power to both
mic inputs as required for
condenser microphones etc.
The METERS monitors the
peak signal level of the left
and right input channels pre
fader. When the GLOBAL
METER CHANGE OVER
switch on the COMMS
module is activated the meters
monitor the left and right
mic/line amp outputs.
The left PHASE switch
activates a 180 degrees phase
change on the left mic/line
input.
The right PHASE switch
activates a 180 degrees phase
change on the right mic/line
input.
The BALANCE control gives
continuous and reciprocal
adjustment of the stereo left
and right signal levels by
+10dB to -10dB. This allows
fine adjustment of the left and
right signal levels and
imaging.
The HI PASS switch connects
the high pass filter into the left
and right signal path.
The HI PASS filter control is
continuously adjustable from
10Hz to 400Hz.
The stereo input pod provides a left and right
DIRECT OUTPUT which can be internally
linked as pre or post insert/eq.
8