User Guide

MIDAS
XL401
pan
l
r
c
mute
pre
pre
pre
pre
st aux 1&2
st aux 3&4
st aux 5&6
st aux 7&8st aux 7&8
0
+6
0
+6
0
+6
0
+6
ON
ON
ON
ON
INS
ST
The stereo aux ON switches
(1-4) connect signals from the
input channel to the stereo aux
busses and are under
automation control.
The stereo aux PRE switches
(1-4) change the signal sent to
the stereo aux busses from post
fader to pre fader whilst
retaining the post pan stereo
image.
The PAN control places the
input channel within a stereo
mix and has a constant power
law i.e. - 3dB at the centre
position.
The INS switch connects the
input insert return signal to the
input channel before or after
the equaliser (see insert pre eq
switch on page 4) and is under
automation control.
The ST switch connects the
input channel post fader signal
to the stereo master buss via
the pan control and is under
automation control.
The MUTE switch mutes the
input channel at all points
except the insert send and pre
insert / eq direct output. This
switch is under automation and
auto mute group control.
The ST AUX controls (1 to 8)
give continuous adjustment of
the level sent from the input
channel (post pan) to the stereo
aux busses. The level
adjustment is from + 6dB to
off.
ST AUX OPTION:- Consoles
can be ordered with dual
concentric controls to give
independent adjustment of the
levels sent from the input
channel (pre pan) to the stereo
busses. The top control gives
adjustment of left signals from
+6dB to off while the bottom
control adjusts the right signal
levels.
6