OPERATORS MANUAL Midas, Klark Teknik Building, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. England. Tel:+44 1562 741515 Fax:+44 1562 745371 Email: midas.info@uk.telex.com Website: www.midasconsoles.com MIDAS Verona Power Supply Operators Manual DOC02-V190 Issue 1.0 - February 2004 (c) Telex Communications (UK) Ltd. In line with the company’s policy of continual improvement, specifications and function may be subject to change without notice.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR These symbols are internationally accepted symbols that warn of potential hazards with electrical products.
Klark Teknik Group (UK) Plc, Klark Teknik Building, Walter Nash Road, Kidderminster. Worcs. DY11 7HJ. England Tel:+44 1562 741515 Fax:+44 1562 745371 www.midasconsoles.com www.klarkteknik.com DECLARATION OF CONFORMITY We, Klark Teknik Group (UK) Plc of, Klark Teknik Building, Walter Nash Road, Kidderminster, Worcestershire, DY11 7HJ.
The V190 external power supply has been developed to be used soley with the Midas Verona Series of audio mixing consoles. All backed up by the standard Midas Three Year Warranty. Please take the time to complete and return the registration card and, to obtain the best results with a minimum of effort, also read this operators manual.
Installation and Service The V190 series power supply unit is a two unit nineteen inch (2U 19”) rack mounted power supply for use with the Midas Verona series of consoles only. Installation Before installing the power supply, please ensure that the correct mains supply voltage is selected on the rear of the supply. The mains inlet is provided via a single IEC type socket. A mains cables is supplied with the unit.
Connection and Operation Connection Before powering up the V190 power supply, connect either the front or rear power supply output to the power inlet socket on the console. The V190 power supply provides: PUSH Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 - 0VA + 18V _ 18V + 12V + 48V 0VL +12 volts ±18 volts + 48 volts DC Output / Link The power supply should only be connected to the console using the provided power connection cable.
Using Multiple Power Supplies Using Multiple Power Supplies The number of power supplies shipped as standard with the Verona varies with the frame size as follows: Channels 24 - 32 40 - 56 64 Internal 1 2 2 External 0 0 1 Where multiple supplies are present, these should be switched on at the same time so that excessive load is not applied to any single supply. The external power supply can be used on 24-56 channel frame sizes to add redundancy or replace the internal supplies.
Specifications Technical Specification Mains inlet IEC Mains Voltage Supply 100 - 240V AC Selectable Mains Voltage Ranges 100VAC 120VAC 220VAC 240VAC = = = = 85-110VAC 102-132VAC 187-242VAC 204-264VAC Mains Input Current 100VAC 120VAC 220VAC 240VAC = = = = 4.3A (Max) 3.7A (Max) 2.1A (Max) 1.
