User Guide

4
ATTENTION!
CABLES
This product should only be used with high quality, screened twisted pair audio cables,
terminated with metal bodied 3-pin XLR connectors. The cable shield should be
connected to pin 1. Any other cable type or configuration for the audio signals may
result in degraded performance due to electromagnetic interference.
ELECTRIC FIELDS
Should this product be used in an electromagnetic field that is amplitude modulated by
an audio frequency signal (20Hz to 20KHz, the signal to noise ratio may be degraded.
Degradation of up to 60dB at a frequency corresponding to the modulation signal may
be experienced under extreme conditions (3V/m, 90% modulation).
No permanent damage or degradation of performance will be caused by these
conditions.