User Guide

13
2) Input to Matrix Output. Using Module 1 of the XL88 as an example, the
input to the module takes the following signal path:
Input XLR 1
Routing buttons, Module 1
Routing Level Controls, Module 1
Matrix mixing point, any or all modules
Matrix Output Faders, any or all modules
Matrix Output Mutes, any or all modules
Matrix Output XLRs, any or all modules
The eight Routing buttons on the input module are used to select which outputs
the signal will be routed to. The eight Routing Level Controls adjust how much
level is sent to each Matrix mixing point. Please note that these controls
adjust the OUTGOING signal from the module.
The Matrix Output Fader on each module controls the level of the mixed signal
from the corresponding Matrix Output and the Matrix Output Mute button cuts
that output.
The XL88 has an XLR output for Pre-Fade Listen which can be connected
to a channel of the main mixing console for monitoring, or to a headphone
amplifier or power amplifier and monitor loudspeaker. Please note that none
of the Mute buttons affect PFL.