User Guide

Metering
Equaliser
Automute System
Power
Dimensions
Weight
Options
Type 10 Segment LED Bargraph - Peak Reading
Hi pass slope 12dB/Oct
Hi pass frequency Continuously variable -3dB point from 10Hz to 400Hz
Treble Gain Continuously variable +15dB to -15dB
Centre detent = 0dB
Treble Shelving Freq. Continuously variable - 3dB point from 1kHz to 20kHz
Treble Bell Freq. Continuously variable centre from 1kHz to 20kHz
Treble Bell Bandwidth Continuously variable 0.1 Oct. to 2 Oct
Centre detent = 0.5 Oct
Hi Mid Gain Continuously variable +15dB to -15dB
Centre detent = 0dB
Hi Mid Freq. Continuously variable centre from 400Hz to 8kHz
Hi Mid Bandwidth Continuously variable 0.1 Oct. to 2 Oct.
Centre detent = 0.5 Oct
Lo Mid Gain Continuously variable +15dB to -15dB
Centre detent = 0dB
Lo Mid Freq. Continuously variable centre from 100Hz to 2kHz
Lo Mid Bandwidth Continuously variable 0.1 Oct. to 2 Oct
Centre detent = 0.5 Oct
Bass Gain Continuously variable +15dB to -15dB
Centre detent = 0dB
Bass Shelving Freq. Continuously variable - 3dB point from 20Hz to 400Hz
Bass Bell Freq. Continuously variable centre from 20Hz to 400Hz
Bass Bell Bandwidth Continuously variable 0.1 Oct. to 2 Oct
Centre detent = 0.5 Oct
Channel Quantity 8
Mute ON Voltage +3 to +20V
Mute Off Voltage -20 to +2V
Mute Line Load >500kOhm
Nominal Mains Voltage 115V/230V
Mains Consumption 40W
Phantom Voltage Supply +48V ± 5%
Maximum Phantom Current <10mA
Width 482mm (19 inches)
Depth 250mm (10 inches)
Height 44mm (1.75 inches)
Nett 3kg
Shipping 4kg
Mic Transformer Factory-Fit Only
Output Transformer Factory-Fit or Retro-fit
Technical SpecificationTechnical Specification
XL42 Operators Manual - Page 18