User Guide

The XL42 is a versatile expansion to any system, or a complete system on its own.
You can use it:
As a
Plug the microphone or DI box into the XL42 and the output into the line input of your console. You can also
use the XL42 EQ and bypass your console's EQ. Set PAN to off for mono operation or on for stereo operation.
As a section for your console.
Plug the XL42 into the insert point of your console (Desk Send to XL42 Input and XL42 Output to Desk Return).
Set the switch on the XL42 to the in position in for a line level signal.
As an to your console.
Connect your XL42s in a outputs from the last XL42 into a stereo channel
( on your console or into a stereo/effects return.
As a high quality
Plug your microphones, such as a stereo condenser pair for recording, into the XL42 and the outputs into a
DAT, CD or hard disk recorder.
The XL42 is the perfect companion for any system and could even be used for computer audio or drum sub-mixing
where a high quality pre-amp and EQ is required.
replacement for an inferior mic pre-amp
better EQ
PAD
expansion
pre-amp and EQ
.
daisy chain configuration. Connect
or two mono channels)
.
!
!
!
!
System ConnectionSystem Connection
XL42 Operators Manual - Page 13