User Guide

2 To enter ASSIGNMENT mode first press the LOCK switch (to
un-lock the assignment system). So that the LED is off.
4 Enable the switches to assign the set up required. A long press will
allow multiple assignments and a short press will clear the
previous assignments.
3 To assign a VCA to the FOH signal path you must first press the
VCA button so that its LED is illuminated. This
indicates that the 10 LED’s on the input channel now
indicate assignment of VCA’s to the FOH signal path.
Assigning VCA’s To The FOH Signal Path
38
5 Press the SET switch on the input channels for which the
assignments are required. The SET switch works in two different
ways. A long press will replace all previous settings with the new
assignments, a short press will toggle between the original and the
new assignments.
6 To enter CLEAR mode set all the assign keys to off. To do this
simply press the ones that are illuminated which will then toggle
them off. Then press the SET keys on the channel that need no
assignment.
act
scene
aux /
check
mute
Group
store
a
b
active system
(hold 3secs)
lock
s-i-p
midi system
delete
copy
insert
check
confirm
cancel
now
down
next
act/scene
c/o
last
up
1
3
5
7
9
11
2
4
6
8
12
10
mon
mute
(hold
3secs)
(hold
3secs)
vca
mon
v.c.a./
Mute/