User Guide

1-4
5-8
1-6
+18
+48
+5
+12
on
+48V
1 supply 2
-18
MONO GRP
EXT
MTX
ST GRP
0
+10
gain
mic
talk back
ON
NEUTRIK
1
2
3
The TALK XLR socket
accepts balanced 150 Ohm
microphone signals. The
microphone amplifier gain
is factory set to 50dB and
operates in conjunction
with a peak limiter which
is set to +10dBu.
The talk LEVEL gives
continuous adjustment of
the post limiter signals
from +10dB to off.
The TALK MIC ON
switch connects the signal
talk mic output to the
console's internal talk
busses and to the talk
external output XLR. At
the same time it also dims
all the local monitor
outputs by 20dB to prevent
howl round.
The talk to MONO switch
connects the talk mic and
generator circuits to the
mono master bus.
The talk to ST switch
connects the talk mic and
generator circuits to the
stereo master busses.
The talk to EXT switch
connects the talk mic and
generator circuits to the
external output.
The talk to GRP 1-4 switch
connects the talk mic and
generator circuits to group
1,2,3 and 4 busses.
The talk to GRP 5-8 switch
connects the talk mic and
generator circuits to group
5,6,7 and 8 busses.
The talk to MTX switch
connects the talk mic and
generator circuits to ALL
matrix busses.
The POWER indicators
show the status of all rails
on both power supplies.
The 48V ON switch
activates (or safes) the
connection of 48V to the
input modules.
.
12