User Guide
VCA Assign
To Masters
ST
Mono
PAN
Talk
INS
MUTE
Safe
Solo (Split)
SOLO
Fader
- Each of the groups may be assigned to either VCA 9 or VCA 10 control.
- When depressed, the ST switch causes the group output to be routed to the master
stereo buss.
- When depressed, the MONO switch causes the group output to be routed to the
master mono buss.
- When sent to the master stereo buss, the PAN control places the group signal within
the stereo image. The PAN pot has a constant power law (i.e. -3dB at the centre detent).
- When depressed, signal from the monitor module (i.e. oscillator or microphone) are
routed into the group signal.
- When depressed, the insert point of the channel is enabled and the group insert return
is connected to the group signal path.
- When depressed, the mute for the group output is toggled. When lit, the group signal
is muted at every point after the group insert send. This mute is also controllable from the
snapshot automation system.
- When depressed, the group mute is removed from the snapshot automation system
control.
- When placed in solo split mode, the AFL solos are changed from mono to
stereo.
- The solo switch sends the group to the stereo AFL and the mono PFL buss and obeys
the console’s standard solo behaviour. Buss outputs take lower priority than input channels
when the console is in solo ADD mode.
- The group output level is continuously variable from off (-inf) to +10dB for each
output.
MIDAS
HS0011
mute mute
split
solo solo
group
SOLO
SAFE SAFE
INS INS
TALK TALK
l
l
c
c
r
r
pan pan
to masters
MONO
ST
MONO
ST
Group ModuleGroup Module
MIDAS
HS0011
mute mute
split
solo solo
group
0
0
0
0
0
0
0
0
0
0
0
0
0
0
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
11
22
33
4
5
6
7
4
5
6
7
10
10
5
5
0
20
30
40
SOLO
SAFE SAFE
INS INS
TALK TALK
vca
9
9
10
10
l
l
c
c
r
r
pan pan
to masters
MONO
ST
MONO
ST
0 0
+6 +6
88
fader
fader
insert
insert
matrix
PRE PRE
PRE PRE
0
0
+10
+10
level level
insert insert
direct inputs
MUTE
SOLO
PRE
MUTE
SOLO
PRE
green = stereo aux
red = mono aux
+21+
+18+
+15+
+12+
+9+
+6+
+3+
0
-3-
-6-
-9-
-12-
-15-
-18-
-21-
-24-
-27-
-30-
-33-
-36-
lr
Return
Return
Send
Send
IN
OUT
IN
OUT
1
1
2
2
vca
9
9
10
10
Group module
group outputs
Operators Manual- Page 26