User Guide
In MONO AUX mode:
In STEREO AUX mode:
In STEREO GROUP mode:
PAN
ST
MONO
The buss send pot is a dual purpose switching pot:
Pressing the pot will enable/disable the buss send for that channel. When depressed, the buss
active LED will light to indicate that the buss send is active and also whether the send is pre or
post-fader.
When the PRE button is depressed, the buss send is PRE-Fader, otherwise the buss send is
POST-Fader. The buss active LED is bi-colour to represent this:
Green = POST-Fade
Red = PRE-Fade
Rotating the buss send pot controls the level sent to the mono aux buss.
In this mode the operation is the same for both odd and even numbered buss sends.
The buss send pot is a dual purpose switching pot:
Pressing the even numbered pot will enable/disable the buss send for that channel. When
depressed, the buss active LED will light to indicate that the buss send is active and also
whether the send is pre or post-fader.
When the PRE button is depressed, the buss send is PRE-Fader, otherwise the buss send is
POST-Fader. The buss active LED is bi-colour to represent this:
Green = POST-Fade
Red = PRE-Fade
Rotating the even numbered buss send pot controls the level sent to the stereo aux buss.
In this mode the odd numbered buss send pot acts as the pan control placing the input signal into a stereo (left-to-
right) field.
The buss send pot is a dual purpose switching pot:
Pressing the even numbered pot will enable/disable the buss send for that channel. When
depressed, the buss active LED will light to indicate that the buss send is active.
In this mode, the even and odd buss pots have no other use as group sends are always POST-
Fader and POST-Pan. Hence the signal is sent at UNITY GAIN (i.e. 0dB).
- The pan control defines the stereo position of the channel in a stereo group or stereo master.
The pan obeys constant law whereby the centre detent positions the channel in the centre of
the stereo field with each side at
-3dB.
- When depressed, the ST switch sends the channel output to the Stereo Master Bus via
the Pan Control. The ST LED will light to indicate that the signal has been routed to the stereo
master bus.
- When depressed, the MONO switch sends the channel output to the Mono Master
Bus. The MONO LED will light to indicate that the signal has been routed to the mono master
bus.
Pan and Routing
SIS - The SIS switch enables the spacial imaging system which operates in conjunction with
the pan and image controls. It also acts as a left, centre, right master bus enable overriding
any stereo and mono master bus assignments.
C
0
0
+6
lr
11
12
PRE
PRE
C
0
0
+6
lr
11
12
PRE
PRE
C
0
0
+6
lr
11
12
PRE
PRE
pan
lr
C
mute
image
stereo
lcr
+15
+12
+18
+9
+6
+3
0
-3
-6
-9
-25
SIS
MONO
ST
Mono Input ModuleMono Input Module
c
l
r
c
l
r
c
l
r
c
l
r
c
l
r
c
l
r
c
l
r
c
l
r
c
l
r
0
0
0
0
0
0
0
0
MIDAS
H4002
n
a
p
n
i
a
g
PRE
1
PRE
2
PRE
3
PRE
4
PRE
5
PRE
6
PRE
7
PRE
8
auxtender pod
mono input module
pan
lr
C
MIDAS HS0001
mute
image
stereo
lcr
+15
+12
+18
+9
+6
+3
0
-3
-6
-9
-25
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
1
3
5
7
2
4
6
8
17
19
21
23
18
20
22
24
9
10
11
12
13
14
15
16
C
0
0
+6
lr
C
0
0
+6
lr
C
0
0
+6
lr
0
0
+6
lr
PREPRE
PRE
PRE
PRE
PRE
SIS
+60
+25
+35
+15
gain
0
+10
48V
PAD
O
PRE
MONO
ST
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
15
15
bass
0
freq
20
60 160
400
bell
freq
20
100
400
15
15
0
hi-mid
15
0
lo-mid
freq
400
2k
8k
freq
100
500
2k
Q
+/-
Q
+/-
bell
freq
1k
20k
15
15
0
treble
C
15
PRE
INS
EQ
5k
direct o/p
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
Operators Manual- Page 7