User Guide

0
+6
0
+6
0
+6
0
+6
0
+6
l
l
l
l
l
r
r
r
r
r
c
c
c
c
c
level
level
level
level
level
level
level
level
level
level
0
0
0
0
0
on
on
on
on
on
7
9
6
8
10
on
on
on
on
on
1
3
5
2
4
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
The AUX controls (1 to 10) give
continuous adjustment of the level sent
from the input channel to the aux
busses. The level adjustment is from +
6dB to off. All aux signals default as a
mono sum of the left and right channel
but aux 7,8,9 and 10 can also be
configured in stereo if required by
pressing the stereo switch on the
appropriate group modules.
The aux PRE switches change the
signal sent to the aux busses from post
fader to pre fader.
Aux send ON/OFF switching is
achieved using the console assignment
system. A LED next to each aux pot
provides indication of status. The
assignments may also be stored as part
of a snapshot scene.
7