User Manual
Table Of Contents
- MT531 4G GPS Tracker
- User Manual V2.0
- 1.Overview
- 2.Application
- 3.Specifications
- 4.Installation
- 5.Setup and Configuration
- 5.1Setting Authorized Mobile Phone Numbers
- 5.2Change the password
- 5.3Set the preset phone number
- 5.4Request the single position
- 5.5Over-Speed alarm
- 5.6Phone Alarm for shake
- 5.7SMS Alarm for shake
- 5.8Set APN (Access Point Name)
- 5.9Sleep interval
- 5.10Set Server IP and PORT
- 5.11Set timezone
- 5.12SOS Alarm
- 5.13Sleep mode
- 5.14Low Battery Alarm
- 5.15Cut Off Oil Alarm
- 5.16Phone Tracking
- 5.17Heartbeat report interval
- 5.18ACC Illegal Start Alarm
- 5.19Reboot
- 5.20Reset
- 5.21ACC ON Upload time
- 5.22ACC OFF Upload time
- 6.PC Tracking platform
- 7.Troubleshooting
MT531 User Manual V1.0
http://www.mictrack.com
2
Item
Specifications
4G bands
MT531-E
4G LTE: B1/B3/B5/B7/B8/B20
2G: 900/1800MHz
MT531-A
4G LTE: B1/B2/B3/B4/B5/B7/B8/B28/B66
2G:850/900/1800/1900MHz
Hot start
1s on average
Warm start
15s on average
Cold start
30s on average
Humidity
5%~95% non-concretion
Antennas
Internal 4G & GPS antennas
Sensor
3D acceleration/movement sensor
LED
CHG/GPS/Network
SIM Card interface
Standard Size SIM (2FF)
4. Installation
4.1 SIM Card installation
Get ready a Standard size SIM Card with 10-15MB data a month.
Open the waterproof rubber plug
Insert Sim card (2FF) to sim card slot correctly
Make the Power Button to ON
After that the device will be ready.
4.2 Power ON
Make the Power button to ON, and the device will turn on.
Note:
The device only supports Standard Size SIM card (2FF).
To remove SIM card, use paperclip to press the SIM card to eject the SIM card .
4.3 LED Indications
4.3.1 Blue LED - GPS indicator
Status
Description
Flash
GPS Not Work or No GPS Signal
Light On
GPS Work