User Manual

80
Set display menu
3.12 Set display menu
In this menu, you can set waveform as Draw Type, Brightness, Graticule, and Graticule
Intensity, Persist , Time base and Refresh Rate
3.12.1 Waveform settings
Set waveform draw type mode and waveform brightness. Waveform display mode shows as
sampling dots and vectors, the waveform brightness displays in percentage. See picture 3-26
Picture 3-26 Waveform set menu
a) Following the below steps to set waveform as sampling dots.
1) Press to enter the display menu;
2) Press to enter waveform setting;
3) Press to enter draw type set;