User Manual

76
Cursor measurement
 When the vertical cursor is open, but not the current cursor, then press to set
the vertical cursor as the current cursor.
 If vertical cursor is the current cursor, then press to shut down vertical cursor.
Instructions about activate/move the cursor：press to open the cursor menu and
select the current cursor, then press to activate the cursor(activated cursor is in
solid line and others as hidden line), press or roll the wheel to move the active
cursor; press to open the tracking mode and activate the two cursor simultaneously,
then press or roll the wheel to move the two cursors simultaneously. The results
are shown in the upper-right of the screen. See picture3-23.