User Manual

62
Set automatic measurement type
cycle, press or roll the wheel to left/ right, from top to bottom cycle, press
to confirm or cancel options. Press the touch screen to choose item or cancel this
measurement type directly.
Measure Ch1 frequency and Vpp, measure Ch2 rise time, Vmean, please follow these steps.
1) Plug probes to Ch1 and Ch2 respectively, and connect them to signal source;
2) Set Ch1 as current channel, press then the screen popup measurement
types, press on the touch screen, select Ch1 measurement type as the “Frequency”
and peak-peak; press to choose Ch2 as current channel, and set Ch2
measurement types as rise time and mean
3) Adjust the vertical scale and horizontal scale; make the waveform display At least
one entire cycle. Picture 3-17