User Manual

60
Set automatic measurement type
10
Burst width
The duration of a burst(a series of transient events) and is measured over the
entire waveform or gated region
11
P overshoot
This is measured over the entire waveform or gated region and is expressed
as P overshoot = [(max– high)/amplitude] x 100%
12
N overshoot
This is measured over the entire waveform or gated region and is expressed
as N overshoot = [(low- mini)/amplitude] x 100%
13
Phase
The amount of time that one waveform leads or lags another waveform,
expressed in degrees where 360°comprises one waveform cycle.
14
Peak-peak
The absolute difference between the max. and min. amplitude in the entire
waveform or gated region
15
Amplitude
The high value less the low value measured over the entire waveform or
gated region
16
High
The value is used as 100% whenever high reference, it can be calculated using
either the min/max or histogram method.
17
Low
The value is used as 0% whenever high reference, it can be calculated using