User Manual

25
General knowledge of users’ interface
Users’ interface:
1. There are five kinds of wave capturing mode indicator:
Auto: in auto mode, according the input signal to automatically adjust the vertical scale, the
horizontal time scale, and the trigger mode to make the waveform displays as the best.
Run: Acquire waveform data
Stop: Stop acquiring waveform data
Waiting trigger: a transient state just before trigger event occur
Rolling: Acquire waveform data when scroll the touch screen
2. The probe calibration related square wave output indicator
3. The trigger position icon indicates the waveform trigger position
4. The cursor can be divided into vertical cursor and horizontal cursor, used for measuring
cursor
5. The extension position icon, the center point of the time base zooming out
6. Waveform position indicator, indicate the position of waveform on current screen
between the total sampling data.
7. Date and time.
8. USB connection icon, which means connect it to PC currently.
9. User can view the battery charge status in the following ways