User Manual

202
Record
7.2.3 Oscilloscope waveform record
Oscilloscope waveform can record single channel or dual channels waveform data. Users
should set oscilloscope mode, sampling mode, coupling mode phase and then into the
recorder mode for recording.
Suggestion: sampling mode set to "peak", when oscilloscope in high sampling rate can
capture more signal details.
In recorder mode, you can configure the waveform record start/stop mode; you can set
start/stop trigger level. Oscilloscope waveform recording level scale (horizontal time-base)
the range of adjustment is 10 ms - 2.0 min.
Each has 7 methods to start/stop, respectively set the start/stop mode.
 Normal: manual start/stop recording
 Ch1 rise edge: with Ch1 rise edge start/stop record
 Ch1 fall edge: with Ch1 fall edge start/stop record