User Manual

131
LIN bus trigger and decode
downward cycle, press to return. Set baud rate, using the buttons for user
define. Press or roll the wheel to adjusted value, if need user define, the
touch screen pop up the virtual keyboard, at the user define area, input values,
press Enter on the virtual keyboard. The virtual keyboard is shown in picture 4-3.
Picture 4-3 virtual keyboard
Note: If parity bit, data length equals data bits plus parity bit. If no parity bit, data length is
data bits. For example, data length is 8 bit, total data bit is 8 bit if parity bit exist, If not,