User Manual

96
Set trigger menu
pulse width, conditions as≠1.0ms, trigger level as 0V, follow the steps as below:
1） Press and to select the trigger type as pulse width
2） Press to select trigger source as Ch2;
3） Press to select the polarity as positive;
4） Press to roll the wheel as the trigger level to 0V.
5） Press and to select trigger condition as“≠” and press or
roll wheel to adjust time as 1.0ms;
6） Press to select trigger mode as normal;
7） Press and to select rejection time and press or roll
the wheel to adjust rejection time, positive polarity pulse width trigger